Wharfedale Pro Active 12" Sub
not currently in stock
The new Wharfedale Pro Titan™ Sub-A12, a powerful active subwoofer system designed to produce high quality audio in any performance application. The Titan™ Sub-A12 combines the newest technologies, materials and design topology to ensure absolute accuracy and high output.
The TITAN™ Sub-A12 is powerful 12 inch band pass active subwoofer. A built-in 250 watt (continuous) 500 watt (peak) amplifier conveniently accepts stereo or mono line level inputs via dual, balanced, XLR-¼" "combo" connectors as well as a unique single channel 4Ω speaker level input via a ¼" phone jack which allows for use with a standard sound reinforcement amplifier (when the internal amplifier is not used).
A custom designed, down-firing, aluminum cast frame 12" woofer, with a 2.5" voice coil, is utilized as the heart of the Titan™ Sub-A12's complementary low frequency enhancement system. Integral signal processing includes a dynamic AGC (Automatic Gain Control) circuit, a stereo crossover and signal limiting for the prevention of a distorted signal to the internal amplifier. A convenient and an essential PHASE switch is included to allow for proper subwoofer signal polarity to be selected.
A pair of balanced XLR male output connections, with switchable "High-Pass" mode are available for the stereo line level outputs and may be used to pass through mono or stereo signals from the inputs to another system or to send a high-pass, line-level stereo signal to a pair of powered, full-range speakers such as the popular Wharfedale Pro Titan™ ACTIVE models.
1. Pole mount socket
The top of the Titan™ Sub-A12 provides a convenient built in pole mount socket for easy mounting of a standard 35mm diameter speaker pole (such as the Wharfedale Pro SP-1) for easy top-side mounting of a mid/high passive or active speaker.
2. Integral Carry Handle
The Titan™ Sub-A12 has two rubber over-molded carry handles (one on each side) for easy transportation of the enclosure.
3. Rubber Feet
There are four skid-resistant screw mounted rubber feet on the bottom of the Titan™ Sub-A12.
4. Ports
There are two ports on front of the Titan™ Sub-A12 that are reflex tuned to provide enhanced low frequency response from the enclosure.
Applications:
Because of its functional cabinet design, the Titan™ Sub-A12 is versatile and applicable in a variety of configurations. At home indoors or outdoors, on stage, in clubs, at rehearsals, in theaters and houses of worship, the Titan™ Sub-A12 will provide the high standards of low frequency audio reproduction that you require.
SPECIFICATIONS
MODEL TITAN SUB-A12
GENERAL INFO
System type Reflex subwoofer
Frequency response +/- 3db 55-200Hz
CROSSOVER SECTION
Crossover Frequency / Filter 80Hz/100Hz/120Hz/150Hz/180Hz/200Hz (adjustable)
PHYSICAL FEATURES
Enclosure Material 15mm MDF
Enclosure Colour Grey
Size (mm/inches) 305mm / 12"
Coil Size (mm/inches) 64.26mm / 2.5"
Frame Material steel frame
AMPLIFIER POWER
Continous RMS 250W
Peak (Wats) 500W
Power on indicator LED
Power On Protection Power switch on / off mute
Thermal Protection Amplifier shutdown, auto reset
Low Line Voltage Shut Down 60% Nominal line voltage
Driver Protection Independent LF limiters
DC Protection Yes
Short Protection Yes
INPUT SENSITIVITY 0.37V
Impedance 4 ohm
Speaker Pole Adapter Yes
Inputs A & B Type / Connection Balanced Line Level inputs via two combo connectors
Outputs A & B Type / Connection Balanced Line Level inputs via two combo connectors
High Pass Frequency Selection 150Hz
Phase Switch Selection 0° / 180°
Clip Limiter Turns on approx 250W output
Limiter Indicator Red LED
Power Indicator Blue LED
DIMENSIONS & WEIGHT
Height ( mm / ins ) 360.0mm / 14.2"
Width Front / Rear / mm / ins 493.0mm / 19.4"
Depth ( mm / ins ) 431.0mm / 16.9"
Net weight ( kg / lbs ) 22.31kg /49.0lbs
Gross weight ( kg / lbs ) 26.26kg / 57.8lbs
